1 or 2 E1/T1/J1 ports · TE100, TE200
Yeastar TE100 and TE200 are single and dual-port E1/T1/J1 VoIP gateways supporting up to 30 or 60 concurrent calls. They bridge the gap between E1/T1/J1 and VoIP networks — enabling low-cost calling via SIP trunking, or connecting VoIP systems to E1/T1/J1 service from legacy carriers.
E1/T1/J1 Ports
Concurrent Calls
Fax Support
LAN & WAN
A cost-effective way for small and mid-sized businesses to bring E1/T1/PRI trunks and VoIP together.
A broad feature set that meets varied needs and reduces communication costs.
An easy-to-navigate web GUI and simple installation and management.
A stable hardware and software architecture for dependable trunk connectivity.
Works with various ISDN PBXs, IP-PBXs and softswitches, including Yeastar, Elastix and Lync Server.
The only difference is the number of E1/T1/J1 ports — every other specification is shared.
| Models | TE100 | TE200 |
|---|---|---|
| E1/T1/J1 Ports (Support PRI, E&M) | 1 | 2 |
| Concurrent Calls | Up to 30 | Up to 60 |
| Protocol | SIP (RFC3261) | |
| Transport Protocol | UDP, TCP, TLS, SRTP | |
| Codec | G.711 (alaw/ulaw), G.722, G.726, G.729A, GSM, ADPCM, Speex | |
| Echo Cancellation | ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer | |
| DTMF Mode | RFC2833, SIP Info, In-band | |
| Network | DDNS, Firewall, PPPoE, Static IP, QoS, Static Route | |
| Network Protocol | FTP, TFTP, HTTP, SSH | |
| PRI switch types | Euro ISDN, nation, Q.SIG | |
| Caller ID | BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID | |
| LAN | 1 10/100/1000Mbps | |
| WAN | 1 10/100/1000Mbps | |
| Power Supply | AC 100-240V (12V 2A) | |
| Dimensions (L × W × H) (mm) | 213 x 160 x 44 | |
| Operation Range | 0°C to 40°C, 32°F to 104°F | |
| Storage Range | -20°C to 65°C, -4°F to 149°F | |
| Humidity | 10-90% non-condensing | |
Telephony, signalling and management features built into the TE100 and TE200.
E1/T1/J1 ports are software configurable with programmable TE/NT modes.
Call routing rules, trunk groups, caller ID prefix, call duration limitation and blocklist.
SIP trunk support, SIP peer mode and a built-in SIP registrar for IP phones.
Reliable fax over IP across your E1/T1/PRI lines.
Firewall, IP blocklist, NAT traversal, TLS, SRTP and SSH.
E1/T1/J1 diagnostics, call detail records, packet capture tool, system logs and custom prompts.
Common ways businesses use Yeastar TE gateways to connect ISDN and VoIP.
Link an IP-based system to existing E1/T1/PRI lines while building out VoIP gradually — for IP-PBX, hosted IP-PBX and VoIP call centres.
Connect an existing ISDN PBX to VoIP and lower-cost SIP trunks, protecting existing investment and dialling habits.
Connect multiple PABXs at different sites over IP networks for free inter-office calls.
Hear directly from businesses that have transformed their communications with Cohesive Technologies solutions.
Cancer Institute
Cleo Gold
Balaji Amines Ltd
Vitel Global Com
Everything you need to know about the Yeastar TE Series E1/T1/PRI VoIP Gateway before you buy.
